===============================================================================
                                W A V E C O M
===============================================================================

Open AT Sample: Data Storage

===============================================================================

(To print this file : use Notepad and remove all margins and default header.)

Application description
=======================

 This application allows to handle the A&D storaga area, through the following
command set.
 
  The AT+WRITE command allows to write data in a cell, and to list the currently
  allocated ones.
    
    AT+WRITE=<id>[,<size>]
    
        <id> is the A&D cell identifier
        <size> is the A&D cell required size, in KBytes (max: 10)
          --> If the cell does not exists
            * if used and not equal to 0, the A&D cell will be filled with generated data buffer
            * if not or equal to 0, the current port is switched to data mode using FCM API
              All received data blocks are written in the cell
              End of transfer is Ctrl-Z character.
          --> If the cell exists, it will be deleted
 
    AT+WRITE=?
    
        Lists all the A&D cells in memory
 
 
 
 The AT+READ command dumps the required A&D cell content on the current port

    AT+READ=<id>
    
        <id> is the A&D cell identifier
 
    AT+READ=?
    
        Lists all the A&D cells in memory



 The AT+REPAIR command launches the re-compaction process



 The AT+FORMAT command launches the format process



 The AT+INSTALL command allows to install the provided cell content

    AT+INSTALL=<id>
    
        <id> is the A&D cell identifier
