To
Create a New Static Route Table EntryThe Routing Table Configuration page enables you to add a static route to the routing table of the current virtual router.
To
Create a New Static Route Table EntryEnter the necessary information:
Virtual Router Name: (Read-only) Indicates the current virtual router.
Network Address / Netmask: Indicates the IP address and network mask values associated with the route you want to add to the route table of the current virtual router.
Next Hop Virtual Router Name: Specifies a virtual router as the next hop.
Gateway: Specifies the gateway for the next hop.
Interface: From the drop-down list, select the interface through which the gateway or next-hop router is accessed.
Gateway IP Address: The IP address of the default gateway.
Preference: A weight that determines the best path for traffic to reach its destination. Enter a value between 0 and 255.
Metric: Indicates the priority associated with the route being added to the route table. Enter a value between 1 and 65535.
Permanent: Specifies that the route is kept alive when the interface is down or the IP address is removed from the interface.
Tag: Indicates the tag value used to identify the router.
Click OK to save your changes.
