To Configure a PPP ProfileFor an interface with PPP encapsulation, you must configure a PPP access profile and bind it to an interface. You create an access profile with a user-defined name that is unique on the security device. You can bind the same access profile to more than one interface, but only one profile can be assigned to an interface.
You can configure a specific instance of PPPoA with a user name and password and other parameters, and bind the instance to an interface.
To Configure a PPP ProfileEnter the necessary information:
PPP Profile: Enter the name of the profile. Choose a descriptive name to help you identify the profile.
Authentication: Select the authentication method.
Any means both CHAP and PAP authentication are used.
CHAP means only CHAP authentication is used.
PAP means only PAP authentication is used.
Static IP:Specifies that the connection uses the IP address assigned to the device's interface.
Netmask: Enter the netmask for the PPP profile.
Passive: Selecting this checkbox configures the device to not challenge the Peer.
Local Name: Enter the user name for the PPP profile.
Password: Enter the password for the PPP profile.
Click OK to save your settings.