Backup Interface:Tunnel

This page shows the primary and backup interface settings for an interface configured for switchover when certain VPN tunnels in the interface become unreachable through VPN tunnel monitoring.

Edit the following options to change the default settings:

• Other Options: Enables the

• Auto Switch: Configures the backup interface to switch over to the primary interface automatically.

• Activation Delay: Specifies the number of second to wait after the primary interface goes down and the backup interface is activated. The range is 1 to 60 seconds; the default is 30.

• Deactivation Delay: Specifies the number of second to wait after the primary interface goes down and the backup interface is activated. The range is 1 to 60 seconds; the default is 30.

• Force to Failover: Click to force traffic to be switched from the primary to the backup interface.

• Force to Revert: Click to force traffic to be switched back to the primary interface.

Click Apply.to save your changes.

Click Okay to save your changes and return to the Interfaces > Backup WebUI page.